| We called this pergola
"The Fedora" because like
the timeless hat named Fedora, it is very simple, yet
sleek and stylish. This pergola is perfect when the
object is to make an open outdoor space feel more like
an outdoor room. You can put it over a spa, a fire pit,
or even an outdoor kitchen. Place it in the garden for
an outdoor sitting area. The possibilities are endless.
This pergola kit includes the following specs: 2X6 Rafters,
Double 2X6 Beams, 2X2 Top Slats, 4X4 Posts, 2X4 Angle
Braces, and all 316 Grade Stainless Steel Hardware.
Our company's main focus is to supply
our customers with quality, affordable, easy to assemble,
customizable pergola kits at an Average Joe price. This
pergola kit does just that. With a price that fits most
budgets, a design that's strong, and quality materials
and workmanship, there's no better choice than the Fedora.
If you are comparison shopping beware
of other online retailers that sell pergola kits that
are mass produced in China with cheap lumber, coated
zinc hardware, and steel plates that hold rafters together,
and have complicated assembly instructions. The truth
is that these types of kits just will not last. Here
at pergoladepot.com we never use any inferior materials
or building practices such as these. We produce our
pergolas with the mission of uncompromising quality,
and have taken every step to make certain that your
pergola kit will be easy to install, and stand the test
of time no matter which part of the country you live
in.
Our kits were originally designed to be
used in the Central Florida area where we have to deal
with extreme weather situations all year round such
as:
- Hurricanes
- The second highest air salt content in the world
- Daily Summer Rain/Thunder Storms
- Tornadoes
- Winter Drought Conditions
These elements can be detrimental to the life of the
materials used in outdoor products. So as you can see
we have good reason to be sure that our pergolas were
strongly designed with quality materials that could
stand up to these harsh elements.
As with all of our pergolas, you choose the end cut
to customize it just the way you want it. This pergola
is available in #1 grade .40 ACQ Pressure Treated
Pine or Rough Sawn Western Red Tight Knot Cedar.
We only use stainless steel hardware
to prevent rotting. Every kit comes complete with all
pre-cut, pre-drilled lumber that is pre-marked for easy
assembly. It also includes a set of step-by-step instructions
to guide you through the assembly process. Our pergola
kits are so easy to assemble that two people
can easily have most kits set up in four hours or less
with absolutely no construction knowledge whatsoever.
It's that easy!
So choose your size, and your end cut preference. Then
decide if the pergola will be going on a patio, or into
the ground, and before you know it you will be enjoying
your backyard under a beautiful pergola cut specifically
for you, at an Average Joe price.
Specifications:
- Your Choice of #1 grade .40 Marine Grade Pressure
Treated Pine or Rough Sawn Western Red Tight Knot
Cedar
- 4X4 Posts (optional 8, 10, or 12 foot lengths)
- 2X6 Beams
- 2X6 Rafters
- 2X2 Top Slats
- 2X4 Angle Braces
- 316 Stainless Steel Hardware
- Assembly Instructions
- Your choice of end cut designs
- Attached or Freestanding
Check your local building code to see if you are required
to pull a permit to construct a pergola in your area.
If so we can provide you with drawings and a specifications
sheet to help you in this process. Just let us know
upon checkout and we will forward them to you via email.
Custom Sizes
available upon request.
Questions? Contact
us today! |
)
)
)
){kind=small}
){kind=small}
){kind=small}
){kind=small}